How to stop the three-dimensional parking lot

The three-dimensional parking spaces can be used as follows:

1, on the parking floor, needs to keep the midline uniform speed.

2, into the parking floor after the needs to pay attention to keep the distance between the vehicle and the bend.

3, parking buildings should use the first block or the lowest gear. However, because the inlet and outlet channels are multi-layer spirals up the structure, in the upper and lower ramps must utilize 1 block or the lowest gear uniform speed.

4, into the parking lot of non-front parking spaces easier than the base. And 1.5 meters away from the front of the parking spaces, B-pillar alignment of the adjacent parking spaces.

5, down the parking floor, must use 1 block or the lowest gear. Parking building light close to the ground parking lot, although parking techniques and the basement are basically the same, still need to pay attention to columns, walls, fire extinguishers and other items. When you leave the parking floor to pay attention from the lower floor of the vehicle, must be polite cannot grab the line.

The three-dimensional parking garage is very suitable for crowded urban parking spaces used in the environment because the operation is more complex, the nonprofessional staff is very inconvenient to use, so much three-dimensional parking garage is to prohibit the owner to operate their own.

It is essentially a one-way non-font parking space, so the opening or pouring is very convenient, it should be noted that in order to maintain the balance of each parking spaces should be as far as possible around the wheel and the distance between the parking spaces to keep in line. (http://www.tadachina.com/product.html)If you cannot see the location of the left rear wheel, you can turn the rearview mirror down to the location, adjust the position of the body can easily stop parking spaces.